PET bottle Washing / filling / capping three in one machine is one of advanced models which is our company combines international advanced self-filling process and technology developed specifically for mineral water, pure water and other non-gas beverage filling installation.
Characters of equipment:
1. Direct connection technology between air conveyor and in-feeding starwheel is applied to replace in-feeding screw and conveying chain to ease bottle changing process with only to change few parts. Newly-designed bottle-separating grippers are assembled to starwheel.
2. We adopts Neck-hanging technology in bottle transportation. Instead of traditional starwheel, we use neck-hanging gripper to make bottle-size-changing easily, without equipment height adjustment, only few parts need to be adjusted
3. Specially-designed rinser grippers which are made of stainless steel are firm and endurable, with no contact to screw part of the bottle to prevent second pollution.
4. High-speed, easily-cleaned filling valves with big flow volume are equipped with well CIP system and control system to rinse the equipment thoroughly.
5. Splint of starwheel using twist descending way to simplify the process of bottle-size-changing. Only need to change arch board and starwheel, within ten minutes.
Production: 1000-3000 b/h
Bottle type: Bottle diameter Φ 50 ~ 100 mm; Bottles of 150 ~ 320 mm high
Cap type: Standard plastic cap
Washing pressure: 0.18~0.25Mpa
Washing water: 0.5T/h
Washing time: 3 seconds
Air Pressure: 0.4Mpa
Air consumption: 0.4m3/min
Main Motor: 1.5KW
Hopper motor: 0.18KW
Washing pump: 0.37KW
Into pump: 0.55KW
| 14-12-5 |
Overall dimension (mm)